Stainless Steel Products
Scientific Worksurface Solutions offers made to order professionally manufactured stainless steel worksurfaces which is aligned with our sustainability values since over 70% of the stainless steel used in the manufacturing process comes from post consumer waste. Stainless steel scrap has a high value as secondary raw material, and it is 100 % recyclable without loss of quality. According to the International Stainless Steel Forum up to 92% stainless steel used in buildings and construction are collected for recycling at end of life. The total recycled content of the stainless steel used in our stainless steel worksurfaces varies depending on scrap availability but typically ranges from 85 to 90 % on an annual basis.
Stainless Steel worksurfaces provide excellent chemical and heat resistance and in some cases they are the preferred choice for where sterile environments are necessary. Stainless steel is a good choice for biological science labs, microbiology, biomedical, pharmaceutical, medical and hospital labs. Scientific Worksurface Solutions offers stainless steel worksrufaces in 304 and 316 stainless steel material with 304 finish surfaces are integrally formed with all seams fully welded with stainless steel fillers, ground smooth and blended to a #4 finish and all factory welds are made using the TIG process. Stainless steel integral sinks are also available in any depth and all sink bowls are made from the same material grade and can be equal or greater thickness. The integral sinks have all corners radiuses and welds are hammered ground and polished to produce a smooth invisible joint. Stainless Steel worksurfaces can also be ordered with a sound deadener feature both the counter tops and sinks are available with waterborne, non flammable , non-volatile organic compounds sound deadening material can be applied to the underside of the material.